简单伺服测试仪电路--Simple Servo Tester

简单伺服测试仪电路--Simple Servo Tester

click here to download schemaTIc in pdf

This is a simple servo tester which will comprehensively test the capabiliTIes of almost any modern servo. It has two pushbuttons, CENTRE and SWEEP and a potenTIometer which works as follows:

- CENTRE Does exactly that, centers the servo, afterwards the potenTIometer determines position.
- SWEEP Sweeps the servo back and forth at a rate determined by the potentiometer setting.

The PIC uses its internal timer to set up a constant frame duration of 20ms and the on/off ratio is set by the user.

Have Fun

ed

PCB board (download it below)

suggested panel decal

Parts List

R1 = 1K
R2 = 10K
R3 = 82R
R4 = 10K
R5 = 5K potentiometer

C1 = 27pF
C2 = 27pF
C3 = 100nF

D1 = 4,7V zener diode
Q1 = 10MHz crytal
IC1 = PIC12F675

[责任编辑:电子发烧友---转载请标明出处]

测试仪电路图伺服指示器电路简单

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。