DS1877 SFP控制器，提供双Rx接口

DS1877 SFP控制器，提供双Rx接口 The DS1877 controls and monitors all functions for SFF, SFP, and SFP+ modules including all SFF-8472 functionality. The device supports all LOS functions for two receivers, and continually monitors for LOS of either channel. Four ADC channels monitor V_CC, temperature, and two differential external monitor inputs that can be used to meet all monitoring requirements. Two digital-to-analog converter (DAC) outputs with temperature-indexed lookup tables (LUTs) are available for additional monitoring and control functionality.  

Meets All SFF-8472 Control and Monitoring Requirements

Four Analog Monitor Channels: Temperature, V_CC, RSSI1, RSSI2

• RSSI1 and RSSI2 Support Internal and External Calibration
• Differential Input
• Common-Mode Range from GND to V_CC
• Scalable Dynamic Range
• Internal Direct-to-Digital Temperature Sensor
• Alarm and Warning Flags for All Monitored Channels

Two 10-Bit Delta-Sigma Outputs

Each Controlled by 72-Entry Temperature LUT

Digital I/O Pins: Four Inputs, Four Outputs

Comprehensive Loss-of-Signal (LOS) Detection System

Flexible, Two-Level Password Scheme Provides Three Levels of Security

120 Bytes of Password-1 Protected Memory

128 Bytes of Password-2 Protected Memory in Main Device Address

256 Additional Bytes Located at A0h Slave Address

Receiver 1 is Accessed at A2h Slave Address

Receiver 2 is Accessed at B2h Slave Address

I²C-Compatible Interface

+2.85V to +3.9V Operating Voltage Range

-40°C to +95°C Operating Temperature Range

28-Pin TQFN (5mm x 5mm x 0.75mm) Package

应用/使用

Dual Rx Video SFPs
SFF、SFP和SFP+收发器模块

Typical Operating Circuit

接口控制器SFPSFFnbsp

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。