MAX97000 具有单声道D类扬声器放大器和H类耳机放大器

MAX97000 具有单声道D类扬声器放大器和H类耳机放大器的音频子系统 概述The MAX97000 audio subsystem combines a mono speaker amplifier with a stereo headphone amplifier and an analog DPST switch. The headphone and speaker amplifiers have independent volume control and on/off control. The 4 inputs are configurable as 2 differential inputs or 4 single-ended inputs.

The entire subsystem is designed for maximum efficiency. The high-efficiency 725mW Class D speaker amplifier operates directly from the battery and consumes no more than 1µA in shutdown mode. The Class H headphone amplifier utilizes a dual mode charge pump to maximize efficiency while outputting a ground referenced signal that does not require output coupling capacitors.

The speaker amplifier incorporates a distortion limiter to automatically reduce the volume level when excessive clipping occurs. This allows high gain for low-levels signals without compromising the quality of large signals.

All control is performed using the 2-wire, I²C interface. The MAX97000 operate in the extended -40°C to +85°C temperature range, and is available in the 2mm x 2mm, 25-bump WLP package (0.4mm pitch).  关键特性

2.7V to 5.5V Single Supply Voltage
	725mW Speaker Output (VPVDD = 3.7V, ZSPK = 8Ω + 68µH)
	40mW/Channel Headphone Output (RHP = 16Ω)
	Low-Emission Class D Amplifier
	Efficient Class H Headphone Amplifier
	Ground Referenced Headphone Outputs
	2 Stereo Single-Ended/Mono Differential Inputs
	Integrated Distortion Limiter (Speaker Outputs)
	Integrated DPST Analog Switch
	No Clicks and Pops
	TDMA Noise Free
	2mm x 2mm, 25-Bump 0.4mm Pitch WLP Package

 应用/使用 蜂窝电话
 便携式多媒体播放器

扬声器子系统音频放大器耳机

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。