MAX16838 Integrated, 2-Channel

MAX16838 Integrated, 2-Channel, High-Brightness LED Driver

概述

The MAX16838 is a dual-channel LED driver that integrates both the DC-DC switching boost regulator and two 150mA current sinks. A current-mode switching DC-DC controller provides the necessary voltage to both strings of HB LEDs. The MAX16838 accepts a wide 4.75V to 40V input voltage range and directly withstands automotive load-dump events. For a 5V ±10% input voltage, connect V_IN to V_CC. The wide input range allows powering HB LEDs for small-to-medium-sized LCD displays in automotive and display backlight applications.

An internal current-mode switching DC-DC controller supports the boost or SEPIC topologies and operates in an adjustable frequency range between 200kHz and 2MHz. The current-mode control provides fast response and simplifies loop compensation. The MAX16838 also features an adaptive output-voltage adjustment scheme that minimizes the power dissipation in the LED current sink paths. The MAX16838 can be combined with the MAX15054 to achieve a buck-boost LED driver with two integrated current sinks.

The channel current is adjustable from 20mA to 150mA using an external resistor. The external resistor sets both channel currents to the same value. The device allows connecting both strings in parallel to achieve a maximum current of 300mA in a single channel. The MAX16838 also features pulsed dimming control with minimum pulse widths as low as 1µs, on both channels through a logic input (DIM).

The MAX16838 includes an output overvoltage protection, open LED, shorted LED detection, and overtemperature protection. The device operates over the -40°C to +125°C automotive temperature range. The MAX16838 is available in the 20-pin TSSOP and 4mm x 4mm, 20-pin TQFN packages.

关键特性

Integrated, 2-Channel, 20mA to 150mA Linear LED Current Sinks

Boost or SEPIC Power Topologies for Maximum Flexibility

Adaptive Voltage Optimization to Minimize Power Dissipation in Linear Current Sinks

4.75V to 40V or 5V ±10% Input Operating Voltage Range

5000:1 PWM Dimming at 200Hz

Open-Drain Fault Indicator Output

LED Open/Short Detection and Protection

Output Overvoltage and Overtemperature Protection

Programmable LED Current Foldback at Lower Input Voltages

200kHz to 2MHz Resistor Programmable Switching Frequency with External Synchronization

Current-Mode Control Switching Stage with Internal Slope Compensation

Enable Input

Thermally Enhanced, 20-Pin TQFN (4mm x 4mm) and 20-Pin TSSOP Packages

应用/使用

汽车显示器背光
	车灯应用
	LCD显示器背光

ChannelHighChannelintegrateddualLEDChannelHigh

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。