MAX2852 5GHz接收器

MAX2852 5GHz接收器  概述  The MAX2852 is a single-chip RF receiver IC designed for 5GHz wireless HDMI applications. The IC includes all circuitry required to implement the complete receiver function and crystal oscillator, providing a fully integrated transmit path, VCO, frequency synthesis, and baseband/control interface. It includes a fast-settling, sigma-delta RF fractional synthesizer with 76Hz frequency programming step size. The IC also integrates on-chip I/Q amplitude and phase-error calibration circuits.

The receiver includes both an in-channel RSSI and an RF RSSI.

The receiver chip is housed in a small, 68-pin thin QFN leadless plastic package with exposed pad.  关键特性 

5GHz Single IEEE 802.11a Receiver

• 4900MHz to 5900MHz Frequency Range
• 4.5dB Rx Noise Figure
• 70dB Rx Gain-Control Range with 2dB Step Size, Digitally Controlled
• 60dB Dynamic Range Receiver RSSI
• RF Wideband Receiver RSSI
• Programmable 20MHz/40MHz Rx I/Q Lowpass Channel Filters
• Sigma-Delta Fractional-N PLL with 76Hz Resolution
• Monolithic Low-Noise VCO with -35dBc Integrated Phase Noise
• 4-Wire SPI™ Digital Interface
• I/Q Analog Baseband Interface
• On-Chip Digital Temperature Sensor Readout
• Complete Baseband Interface

+2.7V to +3.6V Supply Voltage

Small, 68-Pin Thin QFN Package (10mm x 10mm)

应用/使用

5GHz FDD回程与WiMax™
 5GHz无线HDMI (WHDI)

接收器SingleGHzchipreceiver

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。