首页 / 百科

MAX8649 1.8A降压型调节器，提供差分远端检测(带应

2009-10-23 00:00:00

MAX8649 1.8A降压型调节器，提供差分远端检测(带应用电路)

The MAX8649 high-efficiency DC-to-DC step-down switching regulator delivers up to 1.8A of output current. The device operates from a 2.5V to 5.5V input voltage range, making it future proof for next-generation battery technologies. The output voltage is I²C programmable from 0.75V to 1.38V. Fully differential remote sense ensures precise DC regulation at the load. Total output error is less than 2% over load, line, and temperature.

The MAX8649 operates at a 3.25MHz fixed frequency. The high operating frequency minimizes the size of external components. The MAX8649 provides several features to minimize EMI of the DC-DC step-down converter. The switching frequency of the converter can be synchronized to the master clock of the application. When synchronizing to an external clock, the MAX8649 measures the frequency of the external clock to ensure that the clock is stable before changing the switching frequency to the external clock frequency.

An on-board DAC allows adjustment of the output voltage in 10mV steps. The output voltage can be programmed directly through the I²C interface, or by preloading a set of on-board registers and using the two VID logic signals to select the appropriate register. Other features include internal soft-start control circuitry to reduce inrush current, output overvoltage, overcurrent, and overtemperature protection.

1.8A Guaranteed Output Current

I²C Programmable V_OUT (750mV to 1.38V in 10mV steps)

Operates from 2.5V to 5.5V Input Supply

On-Chip FET and Synchronous Rectifier

Fixed 3.25MHz PWM Switching Frequency

Synchronizes to 13MHz, 19.2MHz, or 26MHz System Clock when Available

Small 1.0µH Inductor

Initial Accuracy 0.5% at 1.25V Output

2% Output Accuracy Over Load, Line, and Temperature

Power-Save Mode Increases Light Load Efficiency

Overvoltage and Overcurrent Protection

Thermal Shutdown Protection