AD5170: 256-Position, Two-Tim

AD5170:  256-Position, Two-Time Programmable, I²C Compatible Digital Potentiometer

The AD5170 is a 256-position, two-time programmable, digital potentiometer1 that employs fuse link technology, giving users two opportunities to permanently program the resistance setting. For users who do not need to program the digital potentiometer setting in memory more than once, the OTP feature is a cost-effective alternative to EEMEM. The AD5170 performs the same electronic adjustment function as mechanical potentiometers or variable resistors with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance.

The AD5170 is programmed using a 2-wire, I2C®-compatible digital interface. Unlimited adjustments are allowed before permanently setting the resistance value, and there are two opportunities for permanent programming. During OTP activation, a permanent blow fuse command freezes the wiper position (analogous to placing epoxy on a mechanical trimmer).

Unlike traditional OTP digital potentiometers, the AD5170 has a unique temporary OTP overwrite feature that allows for new adjustments even after the fuse is blown. However, the OTP setting is restored during subsequent power-up conditions. This feature allows users to treat these digital potentiometers as volatile potentiometers with a programmable preset.

For applications that program the AD5170 at the factory, Analog Devices, Inc., offers device programming software that runs on Windows NT®, Windows® 2000, and Windows XP operating systems. This software effectively replaces any external I2C controllers, thus enhancing the time-to-market of the systems of the user.

Applications

Systems calibration

Electronics level setting

Mechanical trimmers replacement in new designs

Permanent factory PCB settings

Transducer adjustment of pressure, temperature, position, chemical, and optical sensors

RF amplifier biasing

Automotive electronics adjustments

Gain control and offset adjustments

* The terms digital potentiometer, VR, and RDAC are used interchangeably.

 

Features

• 256-position digital potentiometer
• Two-time programmable (TTP) set-and-forget resistance setting allows second-chance permanent programming
• Unlimited adjustments prior to one-time programming (OTP) activation
• OTP overwrite allows dynamic adjustments with user-defined preset

• End-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ
• Compact 10-Lead MSOP (3 mm × 4.9 mm) package
• Fast settling time: tS = 5 μs typical in power-up
• See Data Sheet for Additional Information

Functional Block Diagram for AD5170

TimProgrammableTimePositionPotentiomePositionPotentiome

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。