MAX17415 1.2MHz低成本、高性能充电器

MAX17415 1.2MHz低成本、高性能充电器

The MAX17415 comprises high-frequency multichemistry battery chargers. These circuits feature a new high-frequency current-mode architecture that significantly reduces component size and cost*. The charger uses a high-side MOSFET with n-channel synchronous rectifier. Widely adjustable charge current, charge voltage, and input current limit simplify the construction of highly accurate and efficient chargers.

The charge voltage and charge current are set with analog control inputs. The charge current setting can also be adjusted with a PWM input. High-accuracy current-sense amplifiers provide fast cycle-by-cycle current-mode control to protect against short circuits to the battery and respond quickly to system load transients. In addition, the charger provides a high-accuracy analog output that is proportional to the adapter current. In the MAX17415, this current monitor remains active when the adapter is absent to monitor battery discharge current.

The MAX17415 adjusts the charge voltage setting and the number of cells through a feedback resistor-divider from the output. All variants of the charger can provide at least 4A of charge current with a 10mΩ sense resistor.

The charger utilizes a charge pump to control an n-channel adapter selection switch. The charge pump remains active even when the charger is off. When the adapter is absent, a p-channel MOSFET selects the battery.

The MAX17415 is available in a small, 4mm x 4mm x 0.8mm 20-pin, lead-free TQFN package. An evaluation kit is available to reduce design time.

关键特性

High Switching Frequency (1.2MHz)

Controlled Inductor Current-Ripple Architecture

• Reduced BOM Cost
• Small Inductor and Output Capacitors

±0.4% Accurate Charge Voltage

±2.5% Accurate Input-Current Limiting

±3% Accurate Charge Current

Single-Point Compensation

Monitor Outputs for

• ±2.5% Accurate Input Current Limit
• ±2.5% Battery Discharge Current
• AC Adapter Detection

Analog/PWM Adjustable Charge-Current Setting

Battery Voltage Adjustable for 3 and 4 Cells (MAX17005B) or 2 and 3 Cells (MAX17006B)

Adjustable Battery Voltage (4.2V to 4.4V/Cell)

Cycle-by-Cycle Current Limit

• Battery Short-Circuit Protection
• Fast Response for Pulse Charging
• Fast System-Load-Transient Response

Programmable Charge Current < 5A

Automatic System Power Source Selection with n-Channel MOSFET

Internal Boost Diode

+8V to +26V Input Voltage Range

应用/使用

笔记本电脑
 具有可充电电池的便携式设备
 台式PC
 

高性能低成本充电器MHzHigh

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。