首页 / 百科
MAX291, MAX292, MAX295, MAX296
2009-09-05 00:00:00
MAX291, MAX292, MAX295, MAX296 八阶、低通、开关电容滤波器 概述 The MAX291/MAX292/MAX295/MAX296 are easy-to-use, 8th-order, lowpass, switched-capacitor filters that can be set up with corner frequencies from 0.1Hz to 25kHz (MAX291/MAX292) or 0.1Hz to 50kHz (MAX295/MAX296).
The MAX291/MAX295 Butterworth filters provide maximally flat passband response, and the MAX292/MAX296 Bessel filters provide low overshoot and fast settling. All four filters have fixed responses, so the design task is limited to selecting the clock frequency that controls the filter's corner frequency.
An external capacitor is used to generate a clock using the internal oscillator, or an external clock signal can be used. An uncommitted operational amplifier (noninverting input grounded) is provided for building a continuous time lowpass filter for post-filtering or anti-aliasing.
Produced in an 8-pin DIP/SO and a 16-pin wide SO package, and requiring a minimum of external components, the MAX291 series delivers very aggressive performance from a tiny area. 关键特性8th-Order Lowpass Filters: Clock-Tunable Corner-Frequency Range: No External Resistors or Capacitors Required Internal or External Clock Clock to Corner Frequency Rati Low Noise: -70dB THD + Noise (Typ) Operate with a Single +5V Supply or Dual ±5V Supplies Uncommitted Op Amp for Anti-Aliasing or Clock-Noise Filtering 8-Pin DIP and SO Packages
The MAX291/MAX295 Butterworth filters provide maximally flat passband response, and the MAX292/MAX296 Bessel filters provide low overshoot and fast settling. All four filters have fixed responses, so the design task is limited to selecting the clock frequency that controls the filter's corner frequency.
An external capacitor is used to generate a clock using the internal oscillator, or an external clock signal can be used. An uncommitted operational amplifier (noninverting input grounded) is provided for building a continuous time lowpass filter for post-filtering or anti-aliasing.
Produced in an 8-pin DIP/SO and a 16-pin wide SO package, and requiring a minimum of external components, the MAX291 series delivers very aggressive performance from a tiny area. 关键特性
- Butterworth (MAX291/MAX295)
- Bessel (MAX292/MAX296)
- 0.1Hz to 25kHz (MAX291/MAX292)
- 0.1Hz to 50kHz (MAX295/MAX296)
- 100:1 (MAX291/MAX292)
- 50:1 (MAX295/MAX296)
应用/使用
50Hz/60Hz电源噪声滤波
ADC抗混叠滤波器
DAC后置滤波器
噪声分析
典型工作电路
MAX291, MAX292, MAX295, MAX296,pdf,datasheet (Switched-Capacitor Filters)
最新内容
| 手机 |
相关内容
什么是直流滤波器，直流滤波器的基本
什么是直流滤波器，直流滤波器的基本结构、特点、工作原理、类型、保护原理、直流滤波器不平衡保护动作原因分析及发展状况，滤波器,
什么是表面声波滤波器，表面声波滤波
什么是表面声波滤波器，表面声波滤波器的组成、特点、原理、分类、常见故障及预防措施，滤波器,分类,稳定性,宽窄,选择,频率，表面声波
单相滤波器：从基础到应用的全面解读
单相滤波器：从基础到应用的全面解读，滤波器,能和,噪声,选择,信号,工作原理，TVP5146PFP单相滤波器是一种用于去除电源信号中的杂波和
电源滤波器的设计原则和参数选择
电源滤波器的设计原则和参数选择，设计原则,参数,选择,滤波器,噪声,高频，AM26LV32CDR电源滤波器是用来净化电源信号的装置，能够阻止高
PLC控制器的主要抗干扰措施
PLC控制器的主要抗干扰措施，抗干扰,控制器,隔离,能力,输入,滤波器，PLC控制器作为一种专门用于工业自动化控制的设备，其稳定性和抗干
贴片共模电感滤波器怎么检测好坏
贴片共模电感滤波器怎么检测好坏，检测,滤波器,损坏,测量,检查,频率，贴片共模电感滤波器（common mode inductor filter）是一种常用于抑
电源和DC/DC转换器中的电磁兼容性(
电源和DC/DC转换器中的电磁兼容性(EMC)考虑因素，转换,兼容性,布局,辐射,信号线,电磁干扰，电源和DC/DC转换器在电磁兼容性(EMC)方面
RC微分器与RC高通滤波器二者有什么
RC微分器与RC高通滤波器二者有什么区别呢？，滤波器,延迟,高频,输出,信号,频率，RC微分器和RC高通滤波器是两种不同的电路，有不同的功能
