首页 / 百科
MAX3514, MAX3516, MAX3517 CATV
2008-10-06 00:00:00
MAX3514, MAX3516, MAX3517 CATV上行放大器 (含应用电路和参数资料)
概述
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75Ω load when driven with a +34dBmV nominal input signal. The MAX3516 drives up to +64dBmV (QPSK). Both input and output ports are differential, requiring that an external balun be used at the output port. The variable gain feature provides greater than 56dB of dynamic range, which is controlled by an SPI™ 3-wire interface. Gain control is available in 0.5dB steps. The devices operate over a frequency range of 5MHz to 65MHz.
The MAX3514 is a pin-for-pin compatible upgrade for the MAX3510. Like the MAX3510, the MAX3514 is internally matched for use with a 2:1 (voltage ratio) balun. The MAX3517 utilizes an external output resistor for greater load-matching flexibility, and offers the same performance as the MAX3514. The MAX3516 is a higher power version of the MAX3514 with 3dB more gain and output power capability, and is offered in a smaller thermally enhanced TSSOP-EP package.
These devices operate from a single +5VDC supply and draw 120mA during transmit (100% duty cycle, +61dBmV out). The MAX3516 can be operated at up to +9VDC supply for improved harmonic distortion performance. The bias current is automatically adjusted based on the output level to increase efficiency. Additionally, the devices are shut off between bursts to minimize noise and save power while still maintaining a match at the output port. Shutdown mode disables all circuitry and reduces current consumption to 10µA (typ).
The MAX3514/MAX3517 are available in a 20-pin QSOP package and the MAX3516 is available in a 20-pin TSSOP-EP package. All devices operate in the extended industrial temperature range (-40°C to +85°C).
关键特性
- 35mA at +34dBmV Out
- 8mA Transmit Disable Mode
应用/使用
CATV状态监视 | |
DOCSIS®/EuroDOCSIS™与DVB线缆调制解调器 | |
OpenCable™机顶盒 | |
线缆电话 MAX3514, MAX3516, MAX3517应用电路 |
典型工作电路 |
最新内容
手机 |
相关内容
光耦仿真器简介和优势
光耦仿真器简介和优势,仿真器,参数,接收器,设计方案,耦合,器件,光耦仿真器是一种用于模拟光耦合器件的工具,它可以帮助工程师在设计电源滤波器的设计原则和参数选择
电源滤波器的设计原则和参数选择,设计原则,参数,选择,滤波器,噪声,高频,AM26LV32CDR电源滤波器是用来净化电源信号的装置,能够阻止高直播回顾 | 宽禁带半导体材料及功
直播回顾 | 宽禁带半导体材料及功率半导体器件测试,测试,性能测试,常见,参数,可靠性,器件,宽禁带半导体材料及功率半导体器件是现代MTK天玑9300重磅发布:全大核时代到
MTK天玑9300重磅发布:全大核时代到来,330亿参数AI大模型装入手机,装入,模型,参数,时代,支持,处理器,近日,联发科技(MediaTek)正式发布了什么是平衡电抗器,平衡电抗器的基本
什么是平衡电抗器,平衡电抗器的基本结构、特点、工作原理、应用、操作规程、常见问题及发展历程,常见问题,结构,工作原理,负载,调节半导体后端工艺:晶圆级封装工艺
半导体后端工艺:晶圆级封装工艺,封装,方法,参数,性能测试,测试,芯片,半导体后端工艺是指在晶圆制造完成后,对DRV8838DSGR芯片进行封装智能振弦传感器:参数智能识别技术的
智能振弦传感器:参数智能识别技术的重要科技创新,智能,识别,参数,传感器,技术方面,用于,TPA3123D2PWPR智能振弦传感器是一种能够智能用于传感器接口设计的运算放大器,哪
用于传感器接口设计的运算放大器,哪几项特性最为关键?,运算放大器,几项,传感器,接口设计,用于,输出,在传感器接口设计中,HT1622运算放