MAX3986 1Gbps to 10.3Gbps Line

MAX3986 1Gbps to 10.3Gbps Linear Equalizer  Description The MAX3986 is a 4-channel low-power linear equalizer optimized for use up to 10.3Gbps that compensates for losses encountered with FR-4 stripline and twin-ax cable. This linear equalizer is intended for use with decision- feedback equalizers (DFEs) integrated into ASICs as well as other applications where increased margin is needed rather than full signal regeneration. DFEs can typically handle 20dB of channel loss at a frequency half the bit rate, assuming the channel is not degraded by reflections and crosstalk. The extended linear range of the MAX3986 preserves the essential signal characteristics needed for optimum DFE performance. The analog equalization of the MAX3986 adds to the effectiveness of the DFE. This increases margin to tolerate environmental and manufacturing variations or to increase the length of the transmission line. The MAX3986 operates from a single 3.3V supply and is housed in a lead-free, 5mm x 7mm TQFN package.  Key Features

Increases Margin of Decision-Feedback Equalizers

Compatible with OOB Signals

Extends Transmission Line Length

Coding Independent, 8b/10b or Scrambled

4 Channels per Device

Analog Equalization

Better Than 18dB Return Loss at 5.15GHz

33mA per Channel Supply Current

Single 3.3V Supply

5mm x 7mm, Lead-Free TQFN Package

Applications/Uses
 6Gbps SAS
 8.5Gbps Fibre Channel
 Active Copper Cable Assemblies
 DDR, 6.25Gbps IEEE 802.3ae XAUI
 High-Speed Backplanes
 OIF-CEI-6G
 QDR, 10.0Gbps InfiniBandSM
 Serial 10.3Gbps Ethernet

LineEqualizerGbpsLinearmaxGbpsLineEqualizer

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。