MAX1400 +5V、18位、低功耗、多通道、过采样(Σ-

MAX1400 +5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC

MAX1400 概述

The MAX1400 18-bit, low-power, multichannel, serial-output ADC uses a sigma-delta modulator with a digital decimation filter to achieve true 16-bit accuracy. The user-selectable decimation factor of the digital filter allows the conversion resolution to be reduced in exchange for a higher output data rate. The device achieves true 16-bit performance at an output data rate of up to 480sps. In addition, the modulator sampling frequency may be optimized for either lowest power dissipation or highest throughput rate. The MAX1400 operates from +5V.

This device offers three fully differential input channels that can be independently programmed with a gain between +1V/V and +128V/V. Furthermore, it can compensate an input-referred DC offset (such as system offset) up to 117% of the selected full-scale range. These three differential channels may also be configured to operate as five pseudo-differential input channels. Two additional, fully differential system-calibration channels are provided for gain and offset error correction. External access is provided to the multiplexer (mux) output to facilitate additional signal processing.

The MAX1400 can be configured to scan all signal inputs sequentially and provide the results through the serial interface with minimum communications overhead. When used with a 2.4576MHz or 1.024MHz master clock, the digital decimation filter can be programmed to produce zeros in its frequency response at the line frequency and associated harmonics, ensuring excellent line rejection without the need for further post-filtering.

The MAX1400 comes in a 28-pin SSOP package.

MAX1400关键特性

18-Bit Resolution, Sigma-Delta ADC

16-Bit Performance with No Missing Codes to 480sps

Low Quiescent Current

• 250µA (operating mode)
• 2µA (power-down mode)

3 Fully Differential or 5 Pseudo-Differential Signal Input Channels

2 Additional Fully Differential Calibration Channels/Auxiliary Input Channels

Access to the Mux Output/ADC Input

Programmable Gain and Offset

Fully Differential Reference Inputs

Converts Continuously or On Command

Automatic Channel Scanning and Continuous Data Output Mode

Operates with +5V Analog Supply and +3V or +5V Digital Supply

SPI™/QSPI™-Compatible 3-Wire Serial Interface

28-Pin SSOP Package

MAX1400应用/使用

环路供电系统
	便携式工业仪表
	便携式称重仪
	压力传感器与变送器

多通道采样低功耗ADC

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。