MAX394 四路、SPDT、CMOS模拟开关—取代MAX3

MAX394 四路、SPDT、CMOS模拟开关—取代MAX333A

概述

The MAX394 is a precision, low-voltage, quad, single-pole/double-throw (SPDT) analog switch. The four independent switches operate with bipolar supplies ranging from ±2.7V to ±8V, or with a single supply of +2.7V to +15V. The MAX394 offers low on-resistance (less than 35Ω), guaranteed to match within 2Ω between channels and to remain flat over the analog signal range (Δ4Ω max). It also offers break-before-make switching (10ns typical), with turn-off times less than 75ns and turn-on times less than 130ns. The MAX394 is ideal for portable operation since quiescent current runs less than 1µA with all inputs high or low.

This monolithic, quad switch is fabricated with Maxim's low voltage silicon-gate process. Design improvements guarantee extremely low charge injection (10pC), low power consumption (10µW), and electrostatic discharge (ESD) greater than 2000V.

Logic inputs are TTL and CMOS compatible and guaranteed over a +0.8V to +2.4V range for supply voltages up to +8V. When supplies exceed +8V, the inputs are typically +0.8V to +4V. Logic inputs and switched analog signals can range anywhere between the supply voltages without damage.

MAX394 pdf datasheet

关键特性

Low On-Resistance, < 17Ω Typical (35Ω max)

Guaranteed Matched On-Resistance Between Channels, < 2Ω

Guaranteed Flat On-Resistance over Analog Signal Range, Δ4Ω Max

Guaranteed Charge Injection < 10pC

Guaranteed Off-Channel Leakage < 2.5nA at +85°C

ESD Guaranteed > 2000V per Method 3015.7

Single-Supply Operation (+2.7V to +15V) Bipolar-Supply Operation (±2.7V to ±8V)

TTL/CMOS-Logic Compatibility

Rail-to-Rail Analog Signal Handling Capability

Pin Compatible with MAX333, MAX333A

应用/使用

音频信号切换
 通信系统
 平面显示器
 PBX、PABX
 便携式仪表
 机顶盒
 测试设备
 

MAX394应用电路

四路模拟SPDTCMOSMAX333A

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。