首页 / 百科

MAX5963 双通道、7.5V至76V、热插拔控制器和二极

2008-11-15 00:00:00

MAX5963 双通道、7.5V至76V、热插拔控制器和二极管“或”逻辑控制器

概述

The MAX5963 dual hot-swap and diode ORing controller provides complete protection for dual-supply high availability systems. The device operates from 7.5V to 76V and provides hot-swap and low voltage-drop diode ORing functionality for two 7.5V to 76V outputs.

The MAX5963 allows for the safe insertion and removal of system line cards and FireWire® peripherals into a live backplane by providing inrush current control and active current limiting. The device controls external n-channel power MOSFETs to perform low-voltage-drop ORing, inrush current control, and current limiting functions. The current-limit function actively limits the current drawn by the load, protecting the load from a short-circuit condition. The MAX5963 also features a circuit-breaker function that disconnects the power to the load if the load current exceeds the circuit-breaker limit for a programmable circuit-breaker timeout.

The MAX5963 features an autoretry/latchoff input. In autoretry mode, the MAX5963 automatically restarts the turned-off channel after a programmable delay. In latchoff mode, the MAX5963 latches the channel off.

The MAX5963 consumes less than 10µA from the PWR supply in system power-off mode.

The MAX5963 is available in a 40-pin TQFN package (6mm x 6mm) and operates over the 0°C to +85°C upper commercial temperature range.

关键特性

Hot Swaps Two 7.5V to 76V Supplies

Integrates Low-Voltage-Drop ORing Controller

±5% Accuracy Bilevel Active Current Limit/Circuit Breaker

Programmable Current-Limit/Circuit-Breaker Timeout

10µA Power-Off Mode Current

Protects Up to Two FireWire Ports

System Power-On/Off ORing

Latchoff or Autoretry Power Management

Independent ON/OFF Control Allows Undervoltage Lockout Programming

Fast Load Disconnect through FOSO Input (FireWire Port)

应用/使用