美信电子推出汽车应用、双通道接近检测和触摸传感器-MAX14

The MAX1441 proximity and touch sensor IC is designed for capacitive proximity sensing in automotive Passive Remote Keyless Entry (PRKE) and other applications. This device provides signal processing to support two independent touch/proximity sensor channels. The device features two open-drain output pins with high-voltage capability up to 28V as well as five digital I/Os to indicate sensing events. During manufacturing JTAG programming uses four digital I/Os.

The device uses grounded electrode capacitive sensing to measure capacitance between one of the two sense pins and the ground. A hand approaching a sense electrode attached to these sense pins causes a change in measured capacitance indicating the presence (touch or proximity) of the object. Active guard outputs shield the sense electrode from unwanted sources without adding parasitic capacitance. Spread-spectrum techniques in the sensor excitation circuit reduce both electromagnetic emissions and susceptibility to interfering signals. In addition, the sensing excitation frequency is programmable from 100kHz to 500kHz in 10kHz steps to avoid interference.

The sensor input signals are converted to a 12-bit digital data and are available to an on-chip microcontroller (µC). The device provides independent offset-compensation of up to 63pF for each input channel. Each channel can be programmed to 5pF, 10pF, or 20pF full-scale range.

The device features an internal MAXQ® microcontroller with 2kword of flash for user programs and 128 bytes of SRAM. This feature provides the ability to implement customized signal processing and discrimination algorithms that optimize performance in the systems. The device offers user-configurable general-purpose digital I/O lines. Power-on-reset circuitry provides consistent startup of the device, and a watchdog timer ensures long-term reliable operation of the user's software.

The device is available in a 20-pin TSSOP package and is specified over the -40°C to +105°C automotive temperature range.

Low Average Operating Current (100µA at 14V)

1.2.fF LSB Capacitance-to-Digital Resolution (5pF Range)

5V to 28V Operation

45V Overvoltage Protection

Sinusoidal Excitation for Reduced EMI Emissions

Frequency Spreading Operation for Reduced EMI Susceptibility and Emissions

Active-Guard Sense Architecture Provides Increased Flexibility in System Packaging

CMOS/LVCMOS Compatible Outputs

Embedded µC Supports User-Specified Adaptive Sense Algorithms

2kwords Flash Memory

128 Bytes SRAM

±2kV ESD Immunity on Sensor I/O Lines

JTAG Serial Interface

Supports Two Independent Grounded Capacitor Sensor Inputs

-12V Reverse Voltage Protection with External Diode

应用/使用

Object Detection Systems
PRKE System Proximity Sensing

传感器双通道检测推出美信

免责声明：本网信息来自于互联网，目的在于传递更多信息，并不代表本网赞同其观点。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，并请自行核实相关内容。本站不承担此类作品侵权行为的直接责任及连带责任。如若本网有任何内容侵犯您的权益，请及时联系我们，本站将会在24小时内处理完毕。